Phase 1 Completed

%ASA-3-713120

Unknown message text.

%ASA-3-713122

Keep-alives configured keepalive type but peer IP address support keep-alives (type = keepalive type).

%ASA-3-713123

IKE lost contact with remote peer, deleting connection (keepalive type: keepalive type).

%ASA-3-713124

Received DPD sequence number rcv sequence # in DPD Action, description expected seq #.

%ASA-3-713125

Unknown message text.

%ASA-3-713126

Unknown message text.

%ASA-3-713127

Xauth required but selected Proposal does not support xauth, Check priorities of ike xauth proposals in ike proposal list.

Level and

Message

Number

Message Text

%ASA-3-713128

Connection attempt to VCPIP redirected to VCA peer IP address via load balancing.

%ASA-3-713129

Received unexpected Transaction Exchange payload type: payload id.

%ASA-3-713132

Cannot obtain an IP address for remote peer.

%ASA-3-713133

Mismatch: Overriding phase 2 DH Group (DH group DH group id) with phase 1 group (DH group DH group number).

%ASA-3-713134

Mismatch: P1 Authentication algorithm in the crypto map entry different from negotiated algorithm for the L2L connection.

%ASA-3-713138

Group group name not found and BASE GROUP default preshared key not configured.

%ASA-3-713140

Split Tunneling Policy requires network list but none configured.

%ASA-3-713141

Client-reported firewall does not match configured firewall: action tunnel. Received—Vendor: vendor(id), Product product(id), Caps: capability value. Expected—Vendor: vendor(id), Product: product(id), Caps: capability value.

%ASA-3-713142

Client did not report firewall in use, but there is a configured firewall: action tunnel. Expected—Vendor: vendor(id), Product product(id), Caps: capability value.

%ASA-3-713146

Could not add route for Hardware Client in network extension mode, address: IP address, mask: network mask.

%ASA-3-713149

Hardware client security attribute attribute name was enabled but not requested.

%ASA-3-713150

Unknown message text.

%ASA-3-713151

Unknown message text.

%ASA-3-713152

Unable to obtain any rules from filter ACL tag to send to client for CPP, terminating connection.

%ASA-3-713153

Unknown message text.

%ASA-3-713159

TCP Connection to Firewall Server has been lost, restricted tunnels are now allowed full network access.

%ASA-3-713161

Remote user (session Id—id) network access has been restricted by the Firewall Server.

%ASA-3-713162

Remote user (session Id—id) has been rejected by the Firewall Server.

Level and

Message

Number

Message Text

%ASA-3-713163

Remote user (session Id—id) has been terminated by the Firewall Server.

%ASA-3-713165

Unknown message text.

%ASA-3-713166

Headend security gateway has failed our user authentication attempt—check configured username and password.

%ASA-3-713167

Remote peer has failed user authentication—check configured username and password.

%ASA-3-713168

Re-auth enabled, but tunnel must be authenticated interactively!

%ASA-3-713174

Hardware Client connection rejected! Network Extension Mode is not allowed for this group!

%ASA-3-713181

Unknown message text.

%ASA-3-713182

IKE could not recognize the version of the client! IPSec Fragmentation Policy will be ignored for this connection!

%ASA-3-713185

Error: Username too long—connection aborted.

%ASA-3-713186

Invalid secondary domain name list received from the authentication server. List Received: list_text Character index (value) is illegal.

%ASA-3-713188

Unknown message text.

%ASA-3-713189

Attempted to assign network or broadcast IP address, removing (IP_address) from pool.

%ASA-3-713191

Unknown message text.

%ASA-3-713193

Received packet with missing payload, Expected payload: payload_id.

%ASA-3-713194

IKE | IPsec Delete With Reason message: termination_reason.

%ASA-3-713195

Tunnel rejected: Originate-Only: Cannot accept incoming tunnel yet!

%ASA-3-713198

User Authorization failed: username User authorization failed.

%ASA-3-713203

IKE Receiver: Error reading from socket.

%ASA-3-713205

Could not add static route for client address: IP address.

Table B-3. Severity 3 (Errors) Logging Messages

Level and

Message

Number

Message Text

%ASA-3-713206

Tunnel Rejected: Conflicting protocols specified by tunnel-group and group-policy.

%ASA-3-713208

Cannot create dynamic rule for Backup L2L entry rule id.

%ASA-3-713209

Cannot delete dynamic rule for Backup L2L entry rule id.

%ASA-3-713210

Cannot create dynamic map for Backup L2L entry rule id.

%ASA-3-713212

Could not add route for L2L peer coming in on a dynamic map. address: IP address, mask: network mask.

%ASA-3-713214

Could not delete route for L2L peer that came in on a dynamic map. address: IP address, mask: network mask.

%ASA-3-713217

Skipping unrecognized rule: action: action client type: client type client version: client version.

%ASA-3-713218

Tunnel Rejected: Client Type or Version not allowed.

%ASA-3-713226

Connection failed with peer, no trustpoint defined in tunnel-group.

%ASA-3-713902

Unknown message text.

%ASA-3-717001

Querying keypair failed.

%ASA-3-717002

Certificate enrollment failed for trustpoint trustpoint_name.

%ASA-3-717009

Certificate validate failed. reason_string.

%ASA-3-717010

CRL polling failed for trustpoint trustpoint_name.

%ASA-3-717012

Failed to refresh CRL cache entry from the server for trustpoint at time_of_failure.

%ASA-3-717015

CRL received from issuer is too large to process.

%ASA-3-717017

Failed to query CA certificate for trustpoint from enrollment _url.

%ASA-3-717018

CRL received from issuer has too many entries to process.

%ASA-3-717019

Failed to insert CRL for trustpoint.

0 0

Post a comment