Info

Reason: incoming encrypted data (number bytes) longer than number bytes.

%ASA-2-215001

Bad route_compress() call, sdb= number.

%ASA-2-217001

No memory for string in string.

%ASA-2-304007

URL Server IP_address not responding, ENTERING ALLOW mode.

%ASA-2-304008

LEAVING ALLOW mode, URL Server is up.

%ASA-2-304009

Ran out of buffer blocks specified by url-block command.

%ASA-2-316001

Denied new tunnel to IP_address. VPN peer limit (platform_vpn_peer_limit) exceeded.

%ASA-2-709007

Configuration replication failed for command command.

%ASA-2-709008

Configuration may be out of sync between Active Standby units.

%ASA-2-713078

Temp buffer for building mode config attributes exceeded: bufsize available size, used value.

%ASA-2-713175

Unknown message text.

%ASA-2-713176

Device_type memory resources are critical, IKE key acquire message on interface interface_number, for Peer IP_address ignored.

%ASA-2-713183

Unknown message text.

%ASA-2-713187

Tunnel Rejected: IKE peer does not match remote peer as defined in L2L policy IKE peer address: IP_address, Remote peer address: IP_address.

%ASA-2-713901

Descriptive_event_string. (This might be the result of a configuration error on the headend or remote-access client.)

%ASA-2-717008

Insufficient memory to process_requiring_memory.

%ASA-2-717011

Unexpected event.

B-3. Errors—Syslog Severity Level 3 Messages

Table B-3 lists all the severity level 3 logging messages, along with their message numbers and text. All the messages supported by FWSM, ASA, and PIX are shown.

Table B-3. Severity 3 (Errors) Logging Messages

Level and

Message

Number

Message Text

%ASA-3-105010

(Primary) Failover message block alloc failed.

%ASA-3-106010

Deny inbound protocol src interface_name: dest_address/dest_port dst interface_name: source_address/source_port.

%ASA-3-106011

Deny inbound (no xlate) string.

%ASA-3-106014

Deny inbound icmp src interface_name: IP_address dst interface_name: IP_address (type dec, code dec).

%ASA-3-108003

Terminating ESMTP/SMTP connection; malicious pattern detected in the mail address from src_ifc:src_ip/src_port to dst_ifc:dst_ip/dst_port. Data:string.

%ASA-3-109010

Auth from inside_address/inside_port to outside_address/outside_port failed (too many pending auths) on interface interface_name.

%ASA-3-109013

User must authenticate before using this service.

%ASA-3-109016

Cannot find authorization ACL acl ID on 'PIX' for user 'user'.

%ASA-3-109018

Downloaded ACL acl_ID is empty.

%ASA-3-109019

Downloaded ACL acl_ID has parsing error; ACE string.

%ASA-3-109020

Downloaded ACL has config error; ACE.

%ASA-3-109023

User from src_IP_address/src_port to dest_IP_address/dest_port on interface outside must authenticate before using this service.

%ASA-3-109026

[aaa protocol] Invalid reply digest received, shared server key may be mismatched.

%ASA-3-109032

Unable to install ACL, downloaded for user, Error in ACE.

%ASA-3-113001

Unable to open AAA session. Session limit [limit] reached.

%ASA-3-113018

User: unsupported downloaded ACL Entry.

%ASA-3-201002

Too many connections on {static | xlate} global_address! econns nconns.

%ASA-3-

Too many UDP connections on {static | xlate} global_address! udp conn limit.

Post a comment

Table B-3. Severity 3 (Errors) Logging Messages

Level and

0 0