Miscellaneous Tools
With experience, you will discover many additional items to add to the tool kit. Figure 2-5 shows how a roll of masking tape can be used to label parts that have been removed from a computer.
Figure 2-5 Labeled Computer Parts
A working computer is also a valuable resource to take with you on computer repairs in the field. A working computer can be used to research information, download tools or drivers, or communicate with other technicians.
Figure 2-6 shows the types of computer replacement parts to include in a tool kit. Make sure that the parts are in good working order before you use them. Using known good working components to replace possible bad ones in computers will help you quickly determine which component might not be working properly. You should store components in an antistatic bag prior to installation, as shown in Figure 2-7.
Figure 2-6 Replacement Computer Parts
Figure 2-6 shows the types of computer replacement parts to include in a tool kit. Make sure that the parts are in good working order before you use them. Using known good working components to replace possible bad ones in computers will help you quickly determine which component might not be working properly. You should store components in an antistatic bag prior to installation, as shown in Figure 2-7.
Lab 2.3.4: Computer Disassembly
In this lab, you will disassemble a computer using safe lab procedures and the proper tools. Use extreme care and follow all safety procedures. Familiarize yourself with the tools you will be using in this lab. Refer to the lab in IT Essentials: PC Hardware and Software Labs and Study Guide, Third Edition (ISBN 1-58713-198-6). You can perform this lab now or wait until the end of the chapter.
Figure 2-7 Store Replacement Computer Parts in an Antistatic Bag
Figure 2-7 Store Replacement Computer Parts in an Antistatic Bag
Implement Proper Tool Use
Safety in the workplace is everyone's responsibility. For computer repairs, always use the correct tool for the job. The correct tool will make the job easier to complete. You are much less likely to injure yourself or damage components when using the proper tool for the job.
Before cleaning or repairing equipment, check to make sure that your tools are in good condition. Clean, repair, or replace any items that are not functioning adequately.
After completing the following sections, you will meet these objectives:
■ Demonstrate proper use of an antistatic wrist strap
■ Demonstrate proper use of an antistatic mat
■ Demonstrate proper use of various hand tools
■ Demonstrate proper use of cleaning materials
Continue reading here: Part Retriever Needle Nose Pliers or Tweezers
Was this article helpful?