Upgrade and Configure BIOS
Motherboard manufacturers periodically release updates for their basic input/output system (BIOS). The release notes describe the upgrade to the product, compatibility improvements, and the known bugs that have been addressed. Some newer devices only operate properly with an updated BIOS.
Early computer BIOS information was contained in ROM chips. To upgrade the BIOS information, the ROM chip had to be replaced, which was not always possible. Modern BIOS chips are EEPROM, or flash memory, which can be upgraded by the user without opening the computer case. This process is called flashing the BIOS.
To view the current BIOS settings on your computer, you must enter the BIOS setup program as shown in Figure 11-17. Press the setup sequence keys while the computer is performing the POST. Depending on the computer, the setup key might be F1, F2, or Delete. Watch the text on the screen or consult the motherboard manual to find the setup key or combination of keys.
Figure 11-17 BIOS Version
|
w |
||
|
Copyright 19B5-2000 Phoenix Technologies Ltd. All Rights Reserved Copyright 2000-2001 BIOS build 212 |
||
|
CPC i Pentium III 1000MHz 640K System RAM Passed 99M Extended RAM Passed 256K Cache SRAM Passed Moose initialized ATAPI CD-KCM: IDE CCROM Drive- |
||
|
Entering SETtiP . . , |
||
|
^^ m m * |
||
The first part of the boot process displays a message that tells you which key to press to enter the setup, or BIOS, mode. There are a variety of settings in the BIOS that should not be altered by anyone unfamiliar with this procedure. If you are unsure, it is best not to change any BIOS setting unless you research the problem in depth.
To download a new BIOS, consult the manufacturer's website and follow the recommended installation procedures. Installing BIOS software online can involve downloading a new BIOS file, copying or extracting files to a floppy disk, and then booting from the floppy. An installation program prompts the user for information to complete the process. Some newer programs will do a BIOS update without the need to create a floppy disk. The BIOS will be updated after you reboot your computer.
Although it is still common to flash the BIOS through a command prompt, several motherboard manufacturers provide software on their websites that allow a user to flash the BIOS from within Windows. The procedure varies from manufacturer to manufacturer.
Caution
An improperly installed or aborted BIOS update can cause the computer to become unusable.
Lab 11.4.4: BIOS File Search
In this lab, you search for newer BIOS versions. Refer to the lab in IT Essentials: PC Hardware and Software Labs and Study Guide, Third Edition (ISBN 1-58713-198-6). You can perform this lab now or wait until the end of the chapter.
Continue reading here: Upgrade and Configure Input and Output Devices
Was this article helpful?
Readers' Questions
-
giulio1 month ago
- Reply
-
Katie-leigh2 months ago
- Reply
-
aleena2 months ago
- Reply
-
cassie1 year ago
- Reply