Example 41 show version Command
Router#show version
Cisco Internetwork Operating System Softwarer
IOS (tm) C2600 Software (C2600-JS-M), Version 12.0(3)T3, RELEASE SOFTWARE (fcl)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 15-Apr-99 17:05 by kpma
Image text-base: 0x80008088, data-base: 0x80C2D514
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) 2610 uptime is 2 hours, 21 minutes System restarted by reload
System image file is "flash:c2 60 0-js-mz.12 0-3.T3.bin"
cisco 2610 (MPC8 60) processor (revision 0x203) with 24576K/8192K bytes of memory.
Processor board ID JAD0418 0ETY (2670216847)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software copyright 1990 by Meridian Technology Corp). TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s) 16 terminal line(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Router#
In this example, the ro uter Is running Cisco I OT Release 12.0(3), image name c2600-rjs-mz. 120-C.T3.bin stored in 8 MB at SIcsE memoiy; sins rooter also has 32 MB of ID RAMI, 25 MB op system memory, and 8 MB shased tacket memosy. Cisco IOT Toftware versioes and quantitiec of Hash memofy and sandomtacc ess memosy s aouid be tracked and recorded fo r referesce purposes. You Can use th is information to teacC software bugs, traek fettures, and prepare lor if pgtades. At this sime, it is a!so useful tn note haw tie router was startedr in tde exvtipPe, this router was restarted by reload. It is always good to note when the router has an error, and if so, remember The ^rook and wa tch for fut ure reaveres cesi
System restarted by error - a SegV exception, PC 0x808da564
Logging unexpected system restarts can save troubleshooting time and provide valuable information that you can use to find the source of the router restarts. You can find this information by searching for the error at Cisco.com, or opening a case with the Cisco Technical Assistance Center (TAC). You may find the following tools useful when diagnosing router restarts:
• Bug Tracker
• Searching the TAC website
• Error Message Decoder
If you find that your routers frequently experience real hardware or software problems, concentrate on fixing the problems first; after you have fixed the problems, you can approach your network appl¡cation's requireme nts and find solutions to enhance application performance.
Continue reading here: Example 43 show memory dead Command
Was this article helpful?