Concentrator Hardware Client

, 192.168.10.31 26.26.11 ¡0,192.168.10.32 192.168.10.10

© 2003, Cisco Systems, Inc. All rights reserved.

By default, a Hardware Client cannot automatically connect to a Concentrator. The administrator must allow remote Hardware Clients using network extension to connect to a Concentrator on a group-by-group basis. From the Concentrator, go to Configuration>User Management>Groups>Modify to enable network extension mode. Under the HW Client tab, select the Allow Network Extension Mode check box. The feature is disabled by default.

Was this article helpful?

0 0

Post a comment