Configuring PPPoA CPE

Cisco routers support three types of PPPoA connections:

■ Cisco proprietary PPPoA

■ The Internet Engineering Task Force (IETF)'s Multiplex (MUX)-encapsulated PPPoA

■ The IETF's Logical Link Control (LLC)-encapsulated PPPoA

Configuring PPPoA involves almost the same tasks as configuring PPPoE. You still must set up the internal Ethernet interface, a dialer interface, PAT, DHCP, and a static default route. The main difference is in the configuration C

of the external interface. Because it is ATM, you need to configure virtual N

path identifier (VPI) and virtual circuit identifier (VCI) information to match I that of the provider. The type of ATM encapsulation must be specified, and C

the PPPoA enabled, and linked to the virtual dialer interface. A dialer pool is W associated with PVC, as shown in Example 2-7.

Example 2-7 Configuring the PPPoA ATM Interface interface ATM1/0 description DSL interface no ip address dsl operating-mode auto pvc 1/100 encapsulation aal5mux ppp dialer dialer pool-member 1

Was this article helpful?

0 0

Post a comment