Process for Cisco ACS

As shown in Figure 10-1, the installation process wants you to test and confirm a few things before moving forward with the installation process:

Step 1. Ensure that end users can successfully connect to the AAA client, such as a network access server (NAS).

Step 2. Verify connections between Microsoft Windows NT/2000 server and other network devices. Make sure that the AAA devices on your network can reach (ping) your Windows NT/2000 server. This will make the installation smoother and help reduce any troubleshooting issues later on when it is time to configure the Cisco Secure ACS and the devices that use it.

Step 3. Check the Cisco IOS Software version on the AAA client and make sure that it is later than Cisco IOS Software Release 11.1.

Step 4. Make sure that your browser version complies with the required version for Microsoft Windows (Internet Explorer 6.0 and Netscape 7.0).

When the installation is complete, the HTML interface appears, in which you make administration and configuration changes to the Cisco Secure ACS.

At the left of the browser, the HTML interface provides a navigation bar with task buttons. Figure 102 shows the HTML interface with the navigation bar containing the task buttons.

0 0

Post a comment