Figure 42 CLI Connections to a 2600 Router

[View full size image]

Remote aijnin'5trat>on can be perlonnad v-<a

1he Inleinet using a rimais management protocol Known as SSH. SSH Tuncljong ¡n 4 instinor Similar to telnet.

h^vitvûf. it crositcs awi rtiaintairis erieiytled connacton benmae'i tha server and Die clienl.

1he Inleinet using a rimais management protocol Known as SSH. SSH Tuncljong ¡n 4 instinor Similar to telnet.

h^vitvûf. it crositcs awi rtiaintairis erieiytled connacton benmae'i tha server and Die clienl.

A modem is connected lo the auimaiy port. Remote administration of the rqdter is completed 6y a dlalup icnnedion,

Modems

Tha coftscie connection uirfiiss a roUûvùf tabla (wnnnoJy rererrtKJ to ai tha "fOniole eabie") In connect a compter directly to the router.

Tha coftscie connection uirfiiss a roUûvùf tabla (wnnnoJy rererrtKJ to ai tha "fOniole eabie") In connect a compter directly to the router.

Cisco 2600 Series Router

A modem is connected lo the auimaiy port. Remote administration of the rqdter is completed 6y a dlalup icnnedion,

Modems

Configuring CLI Access

A new router is delivered without passwords. You must configure passwords for the access method that you intend to use and disable the methods that you do not intend to use. You can complete the initial configuration of a router in different ways. The Autoinstall feature installs a configuration on the router that is sufficient to get the router on the network and allow Telnet connections to complete the configuration. The other configuration methods usually require a physical connection to the router using a console cable. After connecting with the router, you need to enter the line configuration mode and configure the CLI access. After connecting to the router, you must configure the passwords for each type of connection. It is a good idea to configure a different password for each connection type.

Example 4-1 shows the configuration of RouterA for a console connection using the password N3wY0rk$$.

0 0

Post a comment