Removes all dhcpd command statements from the configuration

© 2005 Cisco Systems, Inc. All rights reserved. SNPA V4.0—A1-28

The debug dhcpd command displays information associated with the DHCP server. Use the debug dhcpd event command to display event information about the DHCP server, and use the debug dhcpd packet command to display packet information about the DHCP server. Use the no form of the debug dhcpd command to disable debugging.

The syntax for the debug dhcpd command is as follows:

debug dhcpd event | packet

The syntax for the debug dhcpd command is as follows:

debug dhcpd event | packet

dhcpd event

Displays event information associated with the DHCP server.

dhcpd packet

Displays packet information associated with the DHCP server.

The clear dhcpd command can be used to clear all dhcpd commands, and binding and statistics information. Use the clear dhcpd command with no options to remove all dhcpd command statements from the configuration.

The syntax for the clear dhcpd command is as follows:

clear dhcpd [binding | statistics]

The syntax for the clear dhcpd command is as follows:

clear dhcpd [binding | statistics]

bindings

The binding information for a given server IP address and its associated client hardware address and lease length.

statistics

Statistical information, such as address pool, number of bindings, malformed messages, sent messages, and received messages.

Was this article helpful?

0 0

Post a comment