Configuring AAA with Cisco SDM

Aaa New Model Cisco Command

AAA can also be configured and edited using Cisco SDM. After the aaa new-model command has been configured on the router using the CLI, choose Additional Tasks > AAA.

The figure shows the AAA Authentication Login configuration screen. It shows the two login authentication method lists configured on the router. One is the default method list, and the other is the sdm_vpn_xauth_ml_1 method list. Both method lists use the local database to perform login authentication. This screen can be used to configure new login authentication method lists, or to edit or delete existing login authentication method lists on the router.

2-108 Securing Cisco Network Devices (SND) v2.0 © 2006 Cisco Systems, Inc.

Was this article helpful?

0 0

Post a comment