Used to verify that QoS preclassify has been successfully enabled

router>show interfaces

TunnelO is up, line protocol is up

Hardware is Tunnel

Internet address is

Tunnel source (Serial0/0), destination Tunnel protocol/transport GRE/IP, key disabled, sequencing disabled Checksumming of packets disabled, fast tunneling enabled Last input 00:00:04, output 00:00:04, output hang never Last clearing of "show interface" counters 00:00:51 Queueing strategy: fifo (QOS pre-classification) Output queue 0/0, 0 drops; input queue 0/75, 0 drops

Use the show interfaces command to verify that the QoS for VPNs feature has been enabled. Verify by examining the queuing strategy line in the above figure:

Queueing strategy: fifo (QOS pre-classification)

In the example, the show crypto map command has been issued. This command will show current crypto map configuration and also whether the QoS for VPNs feature has been successfully enabled on a crypto map.

show crypto map [interface interface | tag map-name]

Syntax Description



interface interface

(Optional) Displays only the crypto map set applied to the specified interface.

tag map-name

(Optional) Displays only the crypto map set with the specified map-name.

Was this article helpful?

0 0

Post a comment