Syntax Description

Parameter

Description

access-group acl-index

Number of an IP standard or extended ACL.

For an IP standard ACL, the ACL index range is 1 to 99 and 1300 to 1999. For an IP extended ACL, the ACL index range is 100 to 199 and 2000 to 2699.

access-group name acl-name

Name of an IP standard or extended ACL or name of an extended MAC ACL.

Note The ACL name must begin with an alphabetic character to prevent ambiguity with numbered ACLs. A name also cannot contain a space or quotation mark.

ip dscp dscp-list

List of up to eight DSCP values for each match statement to match against incoming packets. Separate each value with a space. The supported DSCP values are 0, 8, 10, 16, 18, 24, 26, 32, 34, 40, 46, 48, and 56.

Recall that a policy map creates or modifies a policy that can be attached to multiple interfaces. The class command defines traffic classification for the policy to act on based on the class map or the access group. Use the class policy-map configuration command to define a traffic classification for the policy to act on using the class map name or access group. Use the no form of this command to delete an existing class map.

class class-map-name [access-group name acl-index-or-name]

Syntax Description

Parameter

Descri ption

access-group name acl-index-or-name

(Optional) Number or name of an IP standard or extended ACL or name of an extended MAC ACL. For an IP standard ACL, the index range is 1 to 99 and 1300 to 1999; for an IP extended ACL, the index range is 100 to 199 and 2000 to 2699.

Use the set ip dscp policy-map class configuration command to classify IP traffic by setting a DSCP value.

set ip dscp new-dscp

Syntax Description

Parameter

Descri ption

new-dscp

New DSCP value assigned to the classified traffic.

The supported DSCP values are 0, 8, 10, 16, 18, 24, 26, 32, 34, 40, 46, 48, and 56.

Switch(config-if)#

service-policy input policy-map-name

Was this article helpful?

0 0

Post a comment