Example Show Auto QoS and Show Auto QoS Interface

The show auto qos command displays all of the configurations created by the AutoQoS VoIP feature:

Router# show auto qos Serial6/1.1 : DLCI 100 -!

interface Serial6/1

frame-relay traffic-shaping !

interface Serial6/1.1 point-to-point frame-relay interface-dlci 100 class AutoQoS-VoIP-FR-Serial6/1-10 0

frame-relay ip rtp header-compression !

map-class frame-relay AutoQoS-VoIP-FR-Serial6/1-100

frame-relay cir 512000

frame-relay bc 5120

frame-relay be 0

frame-relay mincir 512000

service-policy output AutoQoS-Policy-UnTrust frame-relay fragment 640

To display the configuration of all classes configured for all service policies on the specified interface, or to display the classes for the service policy for a specific PVC on the interface, use the show policy-map interface EXEC or privileged EXEC command.

show policy-map interface dlci] [input | output]

interface-name [vc [vpi/] vci][dlci

Switch#

show auto qos [interface interface-id]

Was this article helpful?

0 0

Post a comment