Displays the configuration of all classes for a specified service policy map or all classes for all existing policy maps

router>show policy-map

Policy Map Test

Class Testl

Weighted Fair Queueing

Bandwidth 100 (kbps)

Max

Threshold

64

(packets)

Class Test2

Weighted Fair Queueing

Bandwidth 200 (kbps)

Max

Threshold

64

(packets)

Class Test3

Weighted Fair Queueing

Bandwidth 300 (kbps)

Max

Threshold

64

(packets)

The show policy-map command can be used to verify the configuration of a policy map.

The show policy-map command can be used to verify the configuration of a policy map.

The show policy-map command also displays live information if the interface keyword is used. The sample output shows the parameters and statistics of the policy map that is attached to outbound traffic on interface FastEthernet0/0.

Service Policy

This topic describes how a service policy is assigned to an interface.

This topic describes how a service policy is assigned to an interface.

The last configuration step when configuring QoS mechanisms using the MQC is to attach a policy map to the inbound or outbound packets using the service-policy command.

Using the service-policy command, you can assign a single policy map to multiple interfaces or assign multiple policy maps to a single interface (a maximum of one in each direction, inbound and outbound). A service policy can be applied for inbound or outbound packets.

Was this article helpful?

0 0

Post a comment