Symptom: Clients cannot connect to VINES servers across a packet-switched network (PSN). Clients can connect to local VINES servers.
Table 13-2 outlines the problems that might cause this symptom and describes solutions to those problems.
Table 13-2 VINES: Client Cannot Connect to Server over PSN
Address mapping error
Step 1 Use the show running-config privileged exec command to view the configuration of the router.
Step 2 For X.25 environments, make sure that LAN protocol-to-X.121
address mapping specified in x25 map vines interface configuration command entries use the VINES addresses and X.121 addresses of the destination routers. Confirm that the destination addresses used in the command entries are correct.
Step 3 For Frame Relay environments, make sure that the LAN
protocol-to-DLCI1 address mapping specified in frame-relay map command entries use the VINES address of the destination router and the DLCI of the local interface. Confirm that the destination address and the local DLCI used in the command entries are correct.
Step 1 Use the show running-config privileged exec command to view the configuration of the local and remote routers. Make sure there is an x25 pvc n vines address interface configuration command specified on the local and remote routers. This command sets up a PVC between the two routers.
Step 2 If the command is not present, add it to the router configuration.
1 DLCI = Data Link Connection Identifier
2 PVC = permanent virtual circuit
Was this article helpful?
Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.