Verification

Verify that the new retransmit interval has been configured on Router A.

rtrA#show ip ospf interface serial 0/1

Serial0/1 is up, line protocol is up Internet Address 10.1.1.1/30, Area 0

Process ID 1, Router ID 1.1.1.1, Network Type POINT_TO_POINT, Cost: 1562 Transmit Delay is 1 sec, State POINT_TO_POINT, Timer intervals configured, Hello 10, Dead 40, Wait 40, Hello due in 00:00:04 Index 1/1, flood queue length 0 Next 0x0(0)/0x0(0)

Retransmit 10

Last flood scan length is 1, maximum is 1 Last flood scan time is 0 msec, maximum is 0 msec Neighbor Count is 1, Adjacent neighbor count is 1 Adjacent with neighbor 2.2.2.2 Suppress hello for 0 neighbor(s)

Verify that Routers A and B have an OSPF neighbor relationship.

rtrA#show ip ospf neighbor

Neighbor ID Pri State

Dead Time Address

Interface

Serial0/1

Was this article helpful?

0 0

Post a comment