Example 597 R1 Routing Table Entry Shows That Only a Single Path Is Used to Reach the Destination Network

R1#show ip route

Routing entry for

Known via "igrp 1", distance 100, metric 8976

Redistributing via igrp 1 Advertised by igrp 1 (self originated)

Last update from on Serial2, 00:00:03 ago Routing Descriptor Blocks:

*, from, 00:00:03 ago, via Serial2 Route metric is 8976, traffic share count is 1

Total delay is 25000 microseconds, minimum bandwidth is 1544 Kbit Reliability 255/255, minimum MTU 1500 bytes Loading 1/255, Hops 0

Example 5-98 shows the interface configuration on both Serial2 and Serial3. Band-widths are equal in this example, but they could have different values in different scenarios.

Was this article helpful?

0 0

Post a comment