Configuration steps on PEwg2

PEwg2(config)#router rip

PEwg2(config-router)#no address-family ipv4 vrf Customer_B

PEwg2(config-router)#router eigrp 1

PEwg2(config-router)#address-family ipv4 vrf Customer_B PEwg2(config-router-af)#autonomous-system wg PEwg2(config-router-af)#network 10.0.0.0 PEwg2(config-router-af)#network 150.┬ęg.0.0

PEwg2(config-router-af)#redistribute bgp 65001 metric 10000 100 255 1 1500

PEwg2(config-router-af)#exit PEwg2(config-router)#router bgp 65001

PEwg2(config-router)#address-family ipv4 vrf Customer_B

PEwg2(config-router-af)#no redistribute rip PEwg2(config-router-af)#redistribute eigrp wg metric 1

Was this article helpful?

0 0

Post a comment