Example 716 Configurations for Routers A and B in Figure 719

Router A# interface ethernet 0

ip address 192.168.3.33 255.255.255.240 interface serial 0

ip address 10.1.1.1 255.255.255.0 router eigrp 1

network 192.168.3.0 network 10.0.0.0

Router B# interface ethernet 0

ip address 192.168.3.21 255.255.255.240 interface serial 0

ip address 10.1.1.2 255.255.255.0 router eigrp 1

network 192.168.3.0 network 10.0.0.0

The problem is that Router A is not receiving routes for the 192.168.3.16 network from Router B. Example 7-17 shows the debug output on Router B.

Was this article helpful?

0 0

Post a comment