Example 330 show ip protocols Command Output Reveals the RIP Version 1 and 2 Packets Being Sent and Received by R1s EthernetO Interface

R1#show ip protocols

Routing Protocol is "rip"

Sending updates every 30 seconds, next due in 4 seconds Invalid after 180 seconds, hold down 180, flushed after 240 Outgoing update filter list for all interfaces is Incoming update filter list for all interfaces is Redistributing: rip

Default version control: send version 2, receive version 2 Interface Send Recv Key-chain

Ethernet0 1 2 1 2

Loopback0 2 2

Routing for Networks:

131.108.0.0 Routing Information Sources: Gateway Distance

131.108.1.2 120

Distance: (default is 120) R1#

Last Update 00:00:07

Example 3-31 shows R2's routing table after the configuration change.

Was this article helpful?

0 0

Post a comment