Section I IP Setup

1. Use the IP subnet 145.10.1.19/27 on the E0 interface of r11.

2. Create virtual interfaces with the following subnets:

- LI20-145.10.128.64/26 on r11

- VLAN X - 145.10.192.15/24 on sw15_3550 c VLAN Y - L45.10.190.15/24 on sw15_3550

3. Use the ice twork 145.10.0.0 for all other subnets and host addresses:

-VLAN A: 27-bit subnet -VLAN I: 29-bit subnet -VLAN D: 24-bit subnet -VLAN F: 24-bit subnet

Was this article helpful?

0 0

Post a comment