Example 119 Output of the show etherchannel Command

3550_switch#show etherchannel 1 detail

Group state = L2 Ports: 2 Maxports = 8

Port-channels: 1 Max Port-channels = 1 Ports in the group:

Port: Gi0/1

Port state = Up Mstr In-Bndl

Channel group = 1 Mode = On/FEC Gcchange = 0

Port-channel = Pol GC = 0x00010001 Pseudo port-channel = Pol

Age of the port in the current state: 00d:03h:04m:31s

Port: Gi0/2

Port state = Up Mstr In-Bndl Channel group = 1 Mode =

On/FEC Gcchange = 0

0x00010001 Pseudo port-channel = Pol 0x00

Age of the port in the current state: 00d:03h:03m:17s Port-channels in the group:

Port-channel: Pol

Age of the Port-channel = 00d:03h:04m:33s

Logical slot/port = 1/0 Number of ports = 2

GC = 0x00010001 HotStandBy port = null

Port state = Port-channel Ag-Inuse

Ports in the Port-channel:

Index Load Port EC state

Time since last port bundled: 00d:03h:03m:19s Gi0/2 3550_switch#

To verify th e PAgP status of a Ethe rChanne I group, u se the fol lowing co mmand:

show pagp [channel-group-number] {counters | internal | neighbor)

This command displays PAgP information such as traffic information, the internal PAgP configuratic neighbor information.

0 0

Post a comment