Example 112 Assigning VLAN 2 to Interface fast

Switch(config) Switch(config-Switch(config-

#int fastEthernet 0/5

if)#switchport mode access if)#switchport access vlan 2

When the VTP mode is set to transparent, VLANs are automatically created with the switchport ac command; you cio not need to statica lly configure them in the VLAN database. If the VTP mode is s you cannot configure VLANs on this switch. The VLANs must be configured on the server switch an< via VTP over a tpunk to the client switch.

0 0

Post a comment