Physical Connectivity 0 Points

Your network is already physically patched. Construct your network, as shown in Figure 8-1 and Figure 8-2.

Configure the following characteristics for the topology in Figure 8-1 and Figure 8-2:

■ Routers R3 and R5 are connected to an ISDN service with the switch type defined as basic-5ess. R3 connects to number plan 7775010 and R5 connects to number plan 7775020.

■ Routers R1 through R5 are connected to the Catalyst Ethernet switch (Catalyst 3350 series switch) as follows:

Interface

Switch-1

R1 E0/0

Fa0/1

R2 E0/0

Fa0/2

R3 Fa0/0

Fa0/3

R4 E0/0

Fa0/4

R5 Fa0/0

Fa0/5

R5 Fa0/1

Fa0/6

PIX inside

Fa0/7

PIX outside

Fa0/8

Backbone 1

Not in use

Backbone 2

Not in use

IDS control interface

Fa0/11

IDS sniffing interface

Fa0/12

No solution is provided on the physical setup. In the lab, all physical connections are precabled; this section is provided for readers who have access to real Cisco equipment and want to practice.

Was this article helpful?

0 0

Post a comment