Catalyst Ethernet Switch Setup I 025 Hour

Configure the Ethernet switch for six vLANs.

■ VLAN 2, named VLAN_A, is connected to R1 and R2.

■ VLAN 6, named VLAN_E, is connected to R6 and R9.

Using VLAN_A, configure the management interface sc0 with the address Ensure that all devices in your network can Telnet to the switch even if R1 or R2 is down.

Make sure the switch is configured in the VTP domain Cisc0_vTp and the switch can create and delete VLANs in the future.

For the connections to Routers R5 and R8, ensure that you have MAC-layer authentication enabled, 802.1x.

Was this article helpful?

0 0

Post a comment