Basic IBGP Configuration 02 Hour

Configure IBGP on all routers in your network.

■ Do not use any WAN IP interfaces for IBGP sessions, because your network is prone to failures across the Frame Relay cloud.

■ Configure R5 and R8 as route reflectors and ensure that all IP traffic has a preferred path that is via Router R5.

■ Minimize IBGP configurations as much as possible.

■ Do not disable BGP synchronization.

■ As long as your network has IP connectivity, ensure that BGP is active in all routers.

■ Using the network command only, advertise all networks to route reflectors R5 and R3.

■ Do not change the administrative distance on any interior routing protocol.

■ Make sure you have full BGP connectivity.

■ Be sure all routers have entries in their IP routing tables.

Was this article helpful?

0 0

Post a comment