General Guidelines

Do not configure any static/default routes unless otherwise specified/required. Use DLCIs provided in the diagram.

Use the IP addressing scheme provided in the diagram; do not change any IP addressing unless otherwise specified.

Use cisco as the password for any authentication string, enable-password, and TACACS+/RADIUS key or for any other purpose unless otherwise specified.

Add additional loopbacks as specified during this lab. Configure VLANs on Sw1 as per Figure 7-1.

All routers should be able to ping any interface in the network using the optimal path. Do not use any external resources or answers provided in this book when attempting the lab. Do not configure any authentication or authorization on the console and aux ports.

NOTE

The real CCIE Lab exams are hands-on structures similar to this book. Each configuration exercise has preassigned point values. The candidate must obtain a minimum mark of 80% to pass. This book provides you with a similar structure to give you a better understanding and experience. For more information on CCIE exam structure, see

www.cisco.com/warp/customer/625/ccie/exam_preparation/preparation.html

^ Previous

You can use any combination of routers as long as you fulfill the topology diagram, outlined in Figure 7-1. It is not compulsory to use the same model of routers.

The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment