Ql) When your BGP autonomous system ID matches that of your BGP neighbor, what is this considered to be?
A) An EGP relationship
B) External BGP
C) Internal BGP
D) An IGP relationship
Q2) When running a full mesh iBGP with 10 BGP speakers, how many total peer connections are required?
C) Forty Five
Q3) Using laymen's terms, what does the iBGP synchronization rule state?
A) Any and all routes must be synchronized with the IGP before being placed in the BGP table.
B) Any and all routes must be synchronized with the EGP before being placed in the IP routing table.
C) All BGP peers must have the same (synchronized) BGP table before routes can be placed in the IP routing table.
D) Do not advertise a route if the IGP does not have it in its routing table.
Q4) When creating route reflection for a specific client, on which iBGP peer should the command(s) be placed?
A) The server
B) The client
C) All iBGP peers
D) The hub router in the iBGP
Q5) When you have modified an access list used with your BGP neighbor statement, which action would be performed next?
A) Clear the route map
B) Clear the iBGP connections
C) Reload the router
D) Apply the access list to an interface
Was this article helpful?