Configuring Local Preference with Route Maps Cont

© 2004 Cisco Systems, Ii

© 2004 Cisco Systems, Ii

In this example, both routers in AS 213 have two external sessions. Using the bgp default local-preference command is no longer possible because the second fastest link is on another router.

The configuration here sets local preference according to the bandwidth of the link. A similar configuration exists on the bottom router. If the primary (2-Mbps) link fails, the paths that are learned through the bottom router in AS 213 (routes with a local preference of 512) will be used.

Copyright © 2004, Cisco Systems, Inc. Route Selection Using Attributes

The PDF files and any printed representation for this material are the property of Cisco Systems, Inc., for the sole use by Cisco employees for personal study. The files or printed representations may not be used in commercial training, and may not be distributed for purposes other than individual self-study.


0 0

Post a comment