Is the Correct Power Supply Being Used

Çtico-oom

* To determine the correct power supply, on the back of the power adapter look for:

- Output +12V 0.1A, -12V 0.1A, +5V 3A, -24V 0.12A, and -71V 0.12A.

* If the power supply is missing the +12V and -12V feeds, then it is for a different Cisco 800 series router and will not work on the 827.

* Note that if using the wrong power supply, the Cisco 827 will power up but will be unable to train up (connect) to the ISP DSLAM.

If the DSL cable is good and the proper pinouts are being used, the next step is to make sure that the correct power supply for the Cisco 827 router is being used.

If the DSL cable is good and the proper pinouts are being used, the next step is to make sure that the correct power supply for the Cisco 827 router is being used.

Note The Cisco 827 router does not use the same power supply as other Cisco 800 Series routers.

0 0

Post a comment