Example

*Mar 1 00:08:24.919: Dil DDR: ip (s=10.1.0.1, d=192.168.201.1),

100 bytes, outgoing uninteresting (dialer-list 1 not defined).

There is a dialer group statement on the dialer interface, but the dialer list referred to does not exist. Configure the dialer list as in this example:

dialer-list group-number protocol ip permit

Note The value for group-number of the dialer-group command must match dialer-group-number of the dialer-list command. For example, the number 1 in dialer-group 1 matches dialer-list 1.

0 0

Post a comment