The show ip eigrp neighbors Command

This command shows the neighbor table. The syntax is as follows:

show ip eigrp neighbors type number Example 7-2 shows the output of this command. Example 7-2 show ip eigrp neighbors Output

Router# show ip eigrp neighbors

Address

IP-EIGRP Neighbors for process 100 Address interface Holdtime

Uptime Q Seq

140.100.48.22 Ethernetl 13 140.100.32.22 Ethernet0 14 140.100.32.31 Ethernet0 12

4 12

Table 7-5 explains the meaning of the important fields in Example 7-2.

Table 7-5 Explanation of the show ip eigrp neighbors Command Results

Table 7-5 explains the meaning of the important fields in Example 7-2.

Table 7-5 Explanation of the show ip eigrp neighbors Command Results

Field

Explanation

process 100

The autonomous system number used to identify routers from whom to accept routing

updates.

Address

IP address of the EIGRP neighbor.

Interface

Interface on which the router is receiving hello packets from the neighbor.

Holdtime

Length of time, in seconds, that the router will wait to hear from the neighbor before

declaring it down. The default is 15 seconds.

Uptime

Time, measured in hours, minutes, and seconds, since the router first heard from this

neighbor.

Q Count

Number of EIGRP packets (update, query, and reply) that the router has queued and is

waiting to send.

Seq Num

The sequence number of the last packet that was received from the neighbor.

SRTT

Smooth Round Trip Time. The time is measured in milliseconds and is from the sending

of the packet to the receipt of an acknowledgment from the neighbor.

RTO

Retransmission timeout, in milliseconds. This shows how long the router will wait

before it retransmits the packet.

Was this article helpful?

0 0

Post a comment